Fire Pumps With Electric And Diesel Motors
United Engineers provides specialized fire pump and water pumping solutions for fire protection systems through Turkuaz Pompa products. The range includes centrifugal pumps and fire pump sets equipped with electric motors or diesel engines.
Fire pumps are used to provide the required water flow and pressure to supply fire protection networks when needed. Selecting the right pump depends on the facility’s nature, network requirements, required flow rate and pressure, as well as the system’s operating method and power source.
Fire pumps are available in different designs and flow capacities, including horizontal end-suction pumps, inline pumps, and vertical turbine pumps.
Explore the Turkuaz Pompa Fire Pump Range
We offer a variety of fire pump solutions to meet the requirements of different projects and facilities. These include centrifugal pumps and pumping sets powered by electric motors or diesel engines.
TNSP Series – End-Suction Centrifugal Pumps
The TNSP Series consists of single-stage, horizontal-shaft centrifugal pumps featuring a volute casing, end-suction inlet, and closed impeller.
This series is designed for pumping non-corrosive liquids that do not contain large solid particles. Its design also provides easy access to internal components for maintenance purposes.
Features and Specifications:
Single-stage, horizontal-shaft design.
Centrifugal operation with a closed impeller.
Coupling connection between the motor shaft and pump shaft.
Suction and discharge flanges in accordance with TS EN 1092-2 / PN 16.
Soft packing used for sealing, with Mechanical Seal options available according to application requirements.
Removable design that allows the pump shaft, bearings, bearing housing, and impeller to be removed without dismantling the volute casing from its installation position.
Counterclockwise direction of rotation when viewed from the suction side.
Roller bearings lubricated externally, with an oil indicator located in the bearing housing.
Fire Pumps with Electric Motors
Electric fire pump sets include a main pump and the control and operating components required to supply water to the fire protection network.
We offer electric pumping sets equipped with control panels, pressure measurement components, and operating valves. More than one pump can also be integrated into the system according to the design requirements.
Features and Components:
Main pump powered by an electric motor.
Separate control panel for each pump.
Systems can be configured with multiple pumps to provide backup operation in the event of a pump failure.
Option to add a pressure-maintaining pump to handle minor leaks and maintain network pressure before the main pump needs to operate.
Pressure switches integrated into the control system.
Pressure measurement using a vacuum meter on the suction line and a manometer on the discharge line.
Design that allows pump components to be accessed and removed for maintenance without dismantling the entire system.
Fire Pumps with Diesel Engines
Diesel fire pumps are used in fire protection systems that require an additional operating power source alongside electric pumps.
Turkuaz Pompa offers fire pump sets powered by diesel engines, with backup configurations designed to help maintain system operation in the event of a failure in one of the pumping units or the primary power supply.
Features:
Pump operation powered by a diesel engine.
Suitable for systems incorporating both electric and diesel pumps.
Support for backup operating arrangements in fire pump sets.
Control and monitoring components for the pumping set.
Spring safety valves used in accordance with the specifications outlined in the catalogue.
Fire Pump Technical Specifications
You can find the technical specifications and dimensions of fire pumps in our fire pump catalogue, which includes a range of technical details related to fire pumps, their components, and certification documents. These specifications should be reviewed when selecting the appropriate pump for each project.
Certified Fire Pumps and NFPA 20 Requirements
When looking for certified fire pumps, it is important to ensure that the pumps and their operating systems comply with the codes and specifications required for the project.
Turkuaz Pompa fire pump sets are manufactured in accordance with the NFPA 20 requirements outlined for fire pump systems, taking into consideration performance specifications, components, control systems, and installation requirements.
It is important to distinguish between manufacturing a pump in accordance with NFPA 20 requirements and obtaining a separate product certification, such as UL or FM approval, for a specific model. Therefore, the certificates and approvals for the required model, along with its supporting documentation, should be reviewed against the project’s requirements and the relevant authority’s specifications before purchase.
Fire Pumps in Accordance with NFPA 20
The Turkuaz Pompa catalogue refers to NFPA 20, the standard for the installation of stationary fire pumps. It defines the requirements for the design, installation, and operation of fire protection pump sets and their components.
The standard includes several technical requirements related to pump performance, including:
- Providing a separate control panel for each pump.
- Pressure at zero flow must not exceed 1.4 times the rated pressure.
- At 150% of the rated flow rate, pressure must not fall below 65% of the rated pressure.
- Water velocity in the suction pipe must not exceed 4.57 m/s.
- Using bronze pump impellers.
- Using pump shafts made of AISI 304 or AISI 316 stainless steel.
- The service factor of electric motors must not exceed 1.15.
Final specifications and installation requirements are subject to engineering review in accordance with the applicable standard, project requirements, and relevant authorities.
Fire Pump Installation and Connection to Fire Protection Networks
Fire pump installation requires consideration of the fire protection network design, water source, required flow rate and pressure, as well as the location of the pumping set and its connection to the suction and discharge lines.
The main components of a fire pump system include:
- The main pump and its power source.
- The backup pump, whether electric or diesel-powered, according to the system design.
- A pressure-maintaining pump (Jockey Pump) to handle minor leaks.
- Control panels and pressure switches.
- Suction and discharge valves.
- Pressure gauges and operating monitoring devices.
- Safety valves and protection components.
The installation should also provide easy access to the pumps for inspection and maintenance. In addition, the system must be designed to withstand horizontal seismic loads in accordance with the requirements specified for the pump set.
United Engineers provides fire network design, installation, and maintenance services, including the implementation of fire protection networks using HDPE pipes while taking the project’s engineering codes and standards into consideration.
How to Choose the Right Fire Pump for Your Project
Choosing a fire pump is not based solely on its power or physical size. The pump must be compatible with the hydraulic design of the fire protection network and the facility’s requirements.
1. Determine the Required Flow Rate
Determine the amount of water the fire protection network needs to deliver. Flow rate is generally measured in litres per minute, cubic metres per hour, or gallons per minute (GPM).
2. Determine the Operating Pressure and Head
The required pressure at the points of use must be identified, taking into consideration pressure losses caused by pipe lengths, fittings, valves, and network elevation differences.
3. Select the Pump Motor Type
The choice between an electric motor and a diesel engine depends on the system design, operating requirements, and available power sources.
4. Determine the Backup Operating Arrangement
Fire protection systems require careful consideration of the main pumps, backup pumps, and auxiliary pumps in accordance with the system design and applicable NFPA 20 requirements.
5. Review the Pump Performance Curve
The pump performance curve must be reviewed to ensure that the pump can deliver the required flow rate and pressure at the specified operating point. Selection should not be based solely on the maximum advertised flow rate or pressure.
Why Choose United Engineers?
United Engineers provides specialized solutions for infrastructure projects and water, irrigation, sewage, and fire protection networks, along with the products and equipment required for various projects.
Through the Turkuaz Pompa fire pump range, we offer pumping solutions powered by electric motors and diesel engines to meet the design requirements of different fire protection networks.
The company also provides fire network design, installation, and maintenance services, while taking applicable engineering codes, standards, and project requirements into consideration.
Contact Us to Find the Right Fire Pump
Are you looking for fire pumps for an industrial, commercial, or residential project?
Contact the United Engineers team to discuss your project requirements and identify the appropriate pumping set, whether powered by an electric motor or a diesel engine.
You can send us your project details, including the required flow rate and pressure, to receive technical advice and information about suitable pumps.
Contact Us Now to request technical details and a quotation for fire pumps.
